Welcome Visitor!

My Cart (0)

(866) 556-1676

Mon–Fri 7:30 AM – 3:30 PM PST

JET 649003K 22-44 PLUS 1-3/4HP, 115-Volt 20-Amp Bench Top Drum Sander

SKU# 649003KI

Availability: Out of stock

Move your mouse over image or click to enlarge

More Views

  • Bench Top Drum Sander
What's Included
  • JET 22-44 PLUS Bench Top Drum Sander, 20 Amp Service 1-3/4HP, 115V
  • Instruction Manual

Warranty: 5 Year Warranty

Heres an intelligent machine that delivers the ultimate finish for the exacting professional woodworker, whether its serious stock removal or the slightest shave. What impressed us the most is the SandSmart-controlled variable feed rate, ranging from 0 to 10 feet per minute. The SandSmart technology monitors the load on the drum motor and automatically maintains the highest feed rate without causing overload. If the load on the drum motor increases, the SandSmart control will decrease the feed rate or, under extreme conditions, stop the conveyor. Conversely, if the load decreases, SandSmart speed up the feed, but only to the point of the manual setting on the dial. Brilliant! Setup isnt too taxing: just a little assembly and then some calibrating and youre up and running. The 1-3/4 HP motor runs at up to 1,700 rpm, but theres virtually no snipe. Stock glides smoothly on the reinforced steel conveyor bed into the sanding area, where height and downward pressure are adjusted easily. The height adjustment wheel is big and easy to handle, letting you really crank it down and remove a lot of material or make the most minute adjustment for the lightest possible touch. Each turn of the wheel makes a 1/16th-inch change, and the mechanism is supported by a thrust bearing, so theres no struggle. The 44-inch width capacity is mirrored by an impressive list of stats: minimum length of workpiece is just 2-1/4 inches; maximum thickness is a beefy 4 inches; minimum thickness is a paper-thin 1/32nd inch. Abrasives change out easily, once you get the hang of it, but after thats its very smooth sailing. One note: Be sure to have a dust collection system you can employ with this sander. The Performax is a pleasure to use and would be a delight to own.--Kris Jensen-Van Heste (amazon)
Features & Specs
  • Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
  • Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments
  • Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage
  • Sealed and permanently lubricated drum ball bearings for longer life
  • Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results
  • Adjustable drum height and downward pressure feature virtually eliminates snipe
  • Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control
  • Patented abrasive take-up fasteners make changing abrasives quick and easy
  • Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute
  • On/off switch with overload protection is front-mounted for operator's convenience
  • One feed and one drive motor for superior sanding control
  • Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
  • Our EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
  • 254 pounds
  • Style: Benchtop
  • Maximum Board Width: 44 (2 passes)
  • Minimum Board Length: 2_ "
  • Maximum Board Thickness: 4 "
  • Minimum Board Thickness: 1/32 "
  • Drum Diameter: 5 "
  • Drum Length: 22 "
  • Drum Speed: 1700 RPM
  • Conveyor Speed: 0 - 10 SFPM
  • Conveyor Motor: 43 in.-lbs. torque, direct drive, dc
  • Dust Port Outside Diameter: 4 "
  • Motor Power: 1 _ HP
  • Motor Voltage: 115 V
  • Motor Current: 20A
  • Motor Phase: 1 Ph
  • Weight: 254 lbs

Customer Reviews

No reviews have been found

Write Your Own Review

You're reviewing: JET 649003K 22-44 PLUS 1-3/4HP, 115-Volt 20-Amp Bench Top Drum Sander

    1 star
    2 stars
    3 stars
    4 stars
    5 stars
  • * Required Fields